'CV Joint KB' Category

  • How To Install replace Worn Ripped RH CV Joint Axle 2002-03 Nissan Maxima Infiniti I30

    May 18, 2013
  • CV Joint Cage

    July 14, 2011

    Applied to the CV joint, CV Joint Cage props and enables smooth rotation of the ball bearings. The CV joint cage is spherical but with ends open, and typically has six openings around the perimeter. CV Joint Cage CV Joint cage is a key components of CV Joint, as it is easily breakable. CV joint […]

  • Saab 900 turbo 1988 USA CV joint repack and new boot

    June 20, 2011

    By svtwrc This is my 1988 Rally Saab 900 T. The left side boot ripped at a rally -X and a few weeks later it made the crunch noise upon slow steering with the throttle applied. I figured it was time for a boot and repacked the Constant velocity joint.

  • bad inner CV joint noise on driveaxle

    June 20, 2011

    For B5 VW Passat with automatic transmission – a cheap rebuilt joint on the driveaxle can result in driveline vibration when stopped in drive or reverse gear that goes away in neutral. This is why on the B5 Passat or Audi with auto trans, you don’t want a cheap rebuilt axle from your the local […]

  • CV Boot

    March 21, 2011

    The rubber part of the driveshaft assembly / CV Axle is known as the CV boot, which is secured with stainless steel clamps. We call it cv boot clamp. The purpose of CV boot is to protect the internal components of the CV joint by retaining the lubricant, and also acting as a dust shied.

Powered by Wordpress and MySQL. Theme by Shlomi Noach, openark.org